System Compatibility Board (Sccb) - Christie Cinema 4K-RGB Service Manual

7. Place the new board, making sure to align it with the two locating pins.
8. To re-install, follow these steps in reverse order.

System compatibility board (SCCB)

Learn how to remove the system compatibility board (SCCB).
1. Remove the top cover (on page 38).
2. Loosen the screw located on the SCCB.
3. Disconnect all harnesses from the board.
4. To disconnect the SCCB from the HUB-NX, slide the SCCB back and remove it.
5. Replace the SCCB.
6. To re-install, follow these steps in reverse order.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Printed circuit boards and sensors
88