Table of Contents
Advertisement
5. For both power supply modules, disconnect the DC output cables from the positive and
negative terminals using a 6 mm driver and 13 mm open-jaw wrench. Retain all screws, nuts,
washers, and lock washers.
6. Loosen the three fasteners securing the power supply module to the projector system.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Electronics
48
Advertisement
Table of Contents
