Housekeeping Board (Hkbb) - Christie Cinema 4K-RGB Service Manual

4. Replace the IMB.
5. To re-install, follow these steps in reverse order.

Housekeeping board (HKBB)

The housekeeping (HKBB) board acts as an interface board with the majority of the control devices
feeding into it, including fans, power supply input, shutter, IR receivers, and so on.
1. Remove the top cover (on page 38).
2. Loosen the two screws securing the housekeeping bracket and remove the bracket.
3. Disconnect the 12 harnesses from the housekeeping board.
The harnesses to disconnect: J30, J81, J85, J89, J101, J102, J103, J104, J105, J110, J112,
and J129.
4. Remove the bracket and housekeeping board from the projector.
5. Remove the 13 screws securing the housekeeping board.
6. Pull back the harnesses and remove the board.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Printed circuit boards and sensors
87