Light Engine Adapter Kit - Christie Cinema 4K-RGB Service Manual

Light Engine Adapter kit

If replacing the light engine (P/N: 003-107210-XX) with the 003-109995-XX version, you must install
the Light Engine Adapter kit (P/N: 003-200640-XX).
The Light Engine Adapter kit contains three components that must be installed to connect the new
light engine to the existing radiator and pump module.
• Liquid cooling bracket mount (P/N: 000-200641-XX)
• QD-M connector (P/N: 000-200644-XX)
• QD-F connector (P/N: 000-200643-XX)
1. Ensure the 003-109995-XX light engine is installed.
2. Install the liquid cooling bracket mount (P/N: 000-200641-XX).
a) Locate the two holes at the top of the light engine bracket.
b) Align the screws of the liquid cooling bracket mount with the holes on the light engine
bracket.
c) Tighten the screws to secure the liquid cooling bracket mount.
3. Install the QD-M connector (P/N: 000-200644-XX).
a) Connect the QD-M connector to the input on the DMD side of the light engine.
Make sure the connector is held by the holder.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
79