Christie Cinema 4K-RGB Service Manual page 20

When making the adjustments, set the light source to minimum power.
To following steps are intended to achieve the highest quality image distributed across the full screen.
1. Close the shutter on the projector to avoid accidental exposure to the projection beam when
working in close proximity to the projection lens.
2. Unlock the horizontal and vertical lock screws (locks A, B, and C).
A Horizontal lock screw (lock A)
B Horizontal lock screw (lock B)
C Vertical lock screw (lock C)
D Vertical boresight screw
E Horizontal boresight screw
F Manual focus knob
3. Open the shutter on the projector.
4. In the right toolbar, select Test Patterns
5. Select the RGB-4K-Boresight pattern and display it full screen.
Make sure the Uncorrected Color Box option is selected.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
.
Service setups
20