3. To remove the light engine security cover, loosen the two screws.
4. Loosen the screw securing the light dump and remove.
5. Replace the light dump.
6. To re-install, follow these steps in reverse order.
Light engine
The light engine modulates incoming light from the light source to create an image, which is projected
to the screen.
Always wear an electrostatic discharge (ESD) strap and use insulated tools when replacing the light
engine.
1. Remove the lens (on page 34).
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
73