Christie Cinema 4K-RGB Service Manual page 76

Tighten the screws to 15 in-lb to ensure the light engine does not become detached from the
base plate during transportation.
3. Remove the two screws from the top convergence plate bracket.
4. Remove the two screws from the side convergence plate bracket.
5. To stabilize the top convergence plate bracket, align the top shipping bracket (red) with the
three empty screw holes.
6. To secure the top shipping bracket, insert three screws and tighten them.
Tighten the screws to 8 in-lb.
7. To stabilize the side convergence plate bracket, align the side shipping bracket (red) with the
four empty screw holes.
8. To secure the side shipping bracket, insert four screws and tighten them.
Tighten the screws to 8 in-lb.
9. Attach a zip tie to secure the light engine coolant hose and mini SAS cables, making sure the
hose and cables are not pinched against any part of the light engine or convergence plate.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-06 Rev. 1 (08-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Optics
76