About This Document - Siemens XC10 Series Operation

1

About this document

Target group
Operating personnel
Commissioning personnel
Maintenance personnel
Building Technologies
Fire Safety
Goal and purpose
This document describes the operation of the extinguishing control panel XC10.
The reader shall become familiar with the possible indications and operating
functions on the PMI, as well as with the functionality of the panel in the overall
system. This understanding makes an adequate behavior possible in the event of
fire or fault.
Scope of validity
This document applies to the extinguishing control panel of the type XC10, market
package MP2.3.
Target groups
The information in this document is intended for the following target groups:
Activity
- Carries out procedures to correctly
operate the product
- Configures the product at the place
of installation according to customer-
specific requirements
- Checks the product operability and
releases the product for use by the
operator
- Searches for and corrects
malfunctions
- Carries out all maintenance work
- Checks that the products are in
perfect working order
- Searches for and corrects
malfunctions
Reference document
The reference version of this document is the international version in English. The
international version is not localized.
The reference document has the following designation:
ID_x_en_--
x = modification index, en = English, -- = international
About this document
Qualification
- No particular basic training is needed
- Has been instructed by the
commissioning personnel
- Has obtained suitable specialist
training for the function and for the
products
- Has attended the training courses for
commissioning personnel
- Has obtained suitable specialist
training for the function and for the
products
A6V10257477_c_en_--
5
2012-06