Table of Contents
Advertisement
Dionex ED50A Electrochemical Detector
C.1.4
Method—Integrated Amperometry
A method consists of a series of timed steps. Each step has a set of
parameters associated with it.
Initial conditions are applied when a method is invoked. A lower case
next to the last step on the display indicates that the method contains more
steps.
Blank fields denote no change from the previous step. The
blanks the field.
METHOD
TIME
INIT
0.00
2.00
4.00
Help Message
Figure C-6. Method Screen—Integrated Amperometry
Screen Field
Detector
Operating Mode
EDIT
SAVE TO
RUN
TIME
WAVE
RANGE
C-6
I AMP
EDIT
RANGE
WAVE
13
200 uC
Description
Selects the detector operating mode: Conductivity, DC
Amperometry, or Integrated Amperometry.
Specifies the method number (0 through 99) to edit.
Specifies the method number (0 through 99) to save the current
method to.
Specifies the method number (0 through 99) to run. The Hold/Run
button controls the running of the method.
Specifies the start time for each step. Times are displayed
chronologically.
Sets the waveform number (0 through 19) to run.
Specifies the detection range.
33
SAVE TO
33
OFFSET MARK
*
*
button
Delete
RUN 25
TTL RLY
1
2 1 2
0
0
0 0
1
1
0
0
Doc. 065551-01 6/13
v
Advertisement
Table of Contents
