Table of Contents
Advertisement
Deleting a Method Step
Move the cursor on the
deleted and press
Deleting an Entire Method
Move the cursor on the
twice.
Saving a Modified Method
To replace the original method with a modified version, enter the number
of the original method in the
To retain the original method and save the modified version elsewhere in
memory, enter an unused method number in the
Enter
3.6
Waveforms
A waveform is a series of steps, defined as points on a plot of potential vs. time.
Waveforms must be defined for the Integrated Amperometry and Voltammetry
modes. Under Local (front panel) control, waveforms are defined on the
screen (press
WAVEFORM
Under Remote (Chromeleon 6.8 software) control, waveform definitions are part
of a Program File (PGM File) and can be defined using the PGM Wizard or
entered manually into the PGM file. The software includes several pre-
programmed waveforms.
Figure 3-5 shows an example waveform and the waveform program that created
it. After Step 6, the waveform automatically reverts to the Step 0 potential.
Doc. 065551-01 6/13
METHOD
twice.
Delete
METHOD
.
,
).
Menu
4
3 • Operation and Maintenance
screen to the time of the step to be
screen to the
EDIT
field and press
SAVE TO
SAVE TO
field and press
Delete
.
Enter
field and press
3-9
Advertisement
Table of Contents
