Table of Contents
Advertisement
C.2 Diagnostic Screens
To access the Dionex ED50A diagnostics, select the
MENU of SCREENS
button returns you to the
pressing
Menu
C.2.1
Diagnostic Menu
The
DIAGNOSTIC MENU
shows all of the possible menu options; however, the options actually
displayed will depend on which detection mode is selected.
•
Option 7,
Conductivity mode and when a leak detector is connected.
•
Option 9,
mode.
•
Option 10,
Amperometry, DC Amperometry, and Voltammetry modes.
POWER-UP SCREEN
1
2
ELAPSED TIME
ANALOG STATUS
3
4
DX- LAN STATUS
5
KEYBOARD TEST
Help Message
NOTE Dionex ED50A detectors shipped in June 2013 or later
Doc. 065551-01 6/13
. While a diagnostic screen is displayed, pressing the
DIAGNOSTIC MENU
returns you to the
MENU of SCREENS
lists the available diagnostic screens. Figure C-19
LEAK CAL(IBRATION) & STATUS
CALIBRATE CD CELL
pH CALIBRATION
DIAGNOSTIC MENU
Figure C-19. Diagnostic Menu Screen
are not recommended for conductivity detection.
Therefore, diagnostic screens for the Conductivity mode
are not described in this manual.
C • User Interface
DIAGNOSTIC MENU
. From the
DIAGNOSTIC MENU
.
, is available only in
, is available only in Conductivity
, is available only in Integrated
6
DIAGNOSTIC TESTS
LEAK CAL & STATUS
7
8
SIGNAL STATISTICS
9
CALIBRATE CD CELL
10 pH CALIBRATION
from the
Menu
,
C-21
Advertisement
Table of Contents
