Table of Contents
Advertisement
Dionex ED50A Electrochemical Detector
C.1 Operational Screens
NOTE Dionex ED50A detectors shipped in June 2013 or later
C.1.1
Menu of Screens—Integrated Amperometry
Figure C-2 shows the
mode.
MENU of INTEGRATED AMPEROMETRY SCREENS
1
MAIN SCREEN
2
DETAIL SCREEN
3
METHOD
4
WAVEFORM
Help Message
Figure C-2. Menu of Screens—Integrated Amperometry
There are two ways to select a screen from this menu:
•
•
To display a brief description of each menu, press the
C-2
are not recommended for conductivity detection.
Therefore, operational screens for the Conductivity
mode are not described in this manual.
MENU of SCREENS
Use the cursor directional buttons to move the cursor to the field
containing the screen number and press
Press the number button on the front panel keypad that corresponds to
the screen.
for the Integrated Amperometry
MODULE SETUP
5
ANALOG OUT SETUP
6
7
TIME FUNCTION IN
8
DIAGNOSTIC MENU
.
Enter
button.
Help
Doc. 065551-01 6/13
Advertisement
Table of Contents
