Thermo Scientific Nicolet iS5 LS User Manual page 38

3
Maintaining the Instrument
34 Nicolet iS5 LS User Guide
Carefully lift the cover upwards approximately 6 mm (0.25 inches) until it clears the lip
of the sampling module baseplate. Then slide the cover straight back until it clears the
sampling arm. Set the cover aside.
Figure 22. Nicolet iS5 LS analyzer with cover removed
7. Lower the sampling arm so it engages firmly with the magnet and then set the instrument
upright.
Figure 23. Nicolet iS5 LS analyzer with cover removed and sampling arm down
Sampling module baseplate
Remove
instrument cover
Close sampling
arm and set
instrument upright
Thermo Scientific