Thermo Scientific Nicolet iS5 LS User Manual page 18

2
Operating the Instrument
14 Nicolet iS5 LS User Guide
The workflow shows its historical results.
3. Make sure the sampling arm is closed and click continue.
4. Make sure Run a new performance test is selected and click continue to start the
workflow.
Follow the instructions in the workflow.
When the workflow is completed, the software displays the report. If the instrument
passed, a green check mark appears to the right of each test result and the operator can
proceed. Here is an example.
Figure 12. Example Daily Performance Test report
Sampling arm in
closed position
Thermo Scientific