Thermo Scientific Nicolet iS5 LS User Manual page 41

Thermo Scientific
10. Install a new O-ring.
Remove the new O-ring from the desiccant replacement kit and install it on the
instrument. Press (rather than roll) the new O-ring into place to be sure it is properly
seated in the groove. The O-ring should lie flat with little tension.
Figure 27. Nicolet iS5 LS analyzer with new desiccant O-ring installed
Press new O-ring into place
3
Maintaining the Instrument
Install
new O-ring
Nicolet iS5 LS User Guide 37