Thermo Scientific Nicolet iS5 LS User Manual page 45

Thermo Scientific
15. Install the instrument's main cover.
Carefully set the instrument on its back so it rests on the back feet.
Raise the sampling arm to avoid damaging it or its cables while you install the main cover.
Carefully slide the cover over the instrument while lifting the cover slightly until it clears
the lip of the sampling module baseplate. Then continue sliding the cover forward until it
engages with the instrument baseplate.
Figure 34. Nicolet iS5 LS analyzer with cover positioned for installation
Sampling module baseplate
3
Maintaining the Instrument
Install
instrument cover
Nicolet iS5 LS User Guide 41