Device Functions
2.5 Device-Recorder Functions
•
Select one of the following Measured-value output options:
–
Table
If you select Table, click Display.
The determined results are displayed in a table. In the multi-page tables, you can show the forward
and backward pages with the >> and << buttons. If you want to view a certain page, enter the page
number at the bottom and click show.
–
Diagram
If you select Diagram, click Display.
You can view 1-day or 1-week records with a diagram. The user interface requires the SIGRA Plug-in.
For more information on the SIGRA plug-in, contact the Siemens Hotline.
–
CSV
If you select CSV, click Download.
The measured values are downloaded as a CSV file and are exported to the storage location you
selected.
2.5.2.3
Reset Min/Max Values
To reset the Min/Max values in the Maintenance tab, proceed as follows:
•
In the navigation window, select Presets and click Min/Max values.
[sc_Reset min-max values, 2, en_US]
Figure 2-92
•
Click Reset Min/Max values.
The min/max values are deleted. The Action was successful indication is displayed on the status bar.
Waveform Recorder
2.5.3
Function Description
2.5.3.1
When a trigger function is activated, a waveform recorder records the following sampled values:
•
Voltages
•
Currents
•
Binary inputs
The following table shows all trigger sources of the waveform recorder, as well as the corresponding measure-
ment time base and trigger conditions.
128
Maintenance Tab, Reset Min/Max Values
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020