[sc_q100_Fallback_upload, 1, en_US]
Figure 5-5
Firmware upload
This session is available for the user with a role of installer or administrator. You can find more information on
uploading the firmware in chapter
Save information
In this section, you can click Save device information to save the device-specific information to a local file. It
is available for the user with a role of viewer, operator, installer, engineer, backup operator, or administrator.
Parameter reset
In this section, you can restart the device with the default parameter set. It is available for the user with a role
of engineer, installer, or administrator.
Error log
In this section, you can delete the error messages in the file of error logs. It is available for the user with a role
of operator or administrator.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Fallback Mode, Firmware
2.11.3.2 Firmware Upload via User
Troubleshooting, Repair, and Fallback Mode
5.2 Fallback Mode
Interface.
331