Siemens SICAM Q100 7KG95 Series Manual page 301

•
Switch on the supply voltage of the device.
•
Check whether the LEDs indicate that the device is ready (see chapter
•
Match the IP address and the subnet mask of the network interface card of your computer to the device
settings.
•
Check on the computer screen whether the LAN connection is active. Activate the LAN connection if it is
not activated (see the Windows manual or the Windows online help for more information).
•
For checking purposes, carry out the ping test as follows (example for Windows):
– Click Start on the Windows interface.
– Select Execute....
– Enter cmd in the dialog and click OK.
– Enter: ping 192.168.0.55.
– Press ENTER.
– Check the output in the following window.
[sc_Ping_OK_log, 1, en_US]
Figure 4-19
•
Start the Web browser.
•
Enter the IP address in the Web browser (for example default IP address: https://192.168.0.55) of the
device and press ENTER.
•
Create or enter the correct user name and password. For more information, refer to
Description.
•
Click Log on.
The user interface opens with the Information tab → Show device information.
NOTE
i
i
The device supports the following Web browsers:
•
Microsoft Internet Explorer
•
Google Chrome
•
Mozilla Firefox
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Ping Test
Commissioning and First Steps
4.13 Operation via PC
5.1.3 LED Indications).
3.2.1 Function
301