Siemens SICAM Q100 7KG95 Series Manual page 239

[sc_q100_Firmware_processing_upload_successful, 1, en_US]
Figure 2-189
After approximately 2 min, the device restarts automatically and the Log on tab appears for reconnection with
the device.
Device firmware, default set of parameters, text libraries, HTML files, or parts thereof are uploaded.
You can find the upload file in the download area in the Siemens Internet under:
support.industry.siemens.com/cs/document/109743592/?en-US. To update the firmware to the latest version,
select the following upload file:
•
File with extension .cms for update from version V1.30 or later version to the latest version
NOTE
i
i
A file with extension .cms includes a digital signature that protects the integrity and authenticity of the
firmware package.
If the firmware upload fails an error message is shown on the user interface. Following are some causes of
failure:
•
Invalid file extension
•
Invalid digital signature
•
Decoding failure
Abort Firmware Upload
If you do not want to upate the firmware, then click Abort in the section Abort firmware upload.
Follow the notes in the following indication:
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Firmware-Upload Indication When Loading a .cms File
Device Functions
2.11 System Functions
https://
239