Event Type
Configuration access
Activation of the configuration
change
Configuration of the CO
sions
Device restart
Modification of security-relevant
parameterization
Firmware update
Time/date change
SD card plugged
SD card unplugged
Warning of audit-log capacity
View via User Interface
3.5.3
To view the audit log in the Maintenance tab, proceed as follows:
•
In the navigation window, select Message logs and click Audit log.
Security messages are displayed on the HTML pages.
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Description
•
Upload a configuration file
•
Download a configuration file
–
Active configuration
–
Passive configuration
Activate the configuration change
•
emis-
Activate/deactivate the CO
2
•
Change the value of the CO
Restart the device due to:
•
Configuration change
–
IP address
–
Subnet mask
–
Default gateway
–
IEC 61850 disable
–
Network type
–
IED name
–
User language
–
Rated frequency
–
Voltage harmonics unit
–
Selection of ph-ph or ph-N
•
Application
–
Enable/abort firmware upload
–
Format SD card
–
Set default IP
•
Fallback mode
–
Firmware upgrade
Modify settings of:
•
Modbus TCP/RTU read-only access
•
SNMP
•
IP address
•
Device name
Upload new firmware to device
Change the time or the date
Plug in an SD card
Unplug the SD card
The audit-log capacity is lower than the threshold.
-emission calculation
2
-emission factor
2
Security
3.5 Audit Log
263