View via Syslog Server
3.6.3
If the Syslog function in the device is activated and the Syslog server is running, you can read the audit logs
from the Syslog server. The audit logs are sent to the configured Syslog server using the UDP protocol when
the logs are recorded in the device.
You can see the audit logs from the Kiwi Syslog Service Manager, see the following figure.
[sc_syslog server, 1, en_US]
Figure 3-14
The following security messages are listed:
•
Date of receiving the security message
•
Time of receiving the security message
•
Priority of the message, which is defined by the Syslog server
•
Hostname of the device which generates the security message
•
Message description
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020
Audit Logs on the Kiwi Syslog Service Manager
Security
3.6 Syslog
267