Leds; Function Description; Configuration Via User Interface - Siemens SICAM Q100 7KG95 Series Manual

Device Functions
2.2 Setting Process Connections and Other Settings

LEDs

2.2.5
2.2.5.1

Function Description

Behavior of the LEDs
[dw_LED-output, 1, en_US]
Figure 2-13
2.2.5.2

Configuration via User Interface

Parameterization of the LEDs
To change the LED settings in the Configure tab, proceed as follows:
•
In the navigation window, select Operational parameters → Process connections and click LEDs.
[sc_q100_LED_config, 1, en_US]
Figure 2-14
•
Configure the respective parameters according to the following table.
54
Behavior of the LEDs
Configure Tab, LEDs
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020