Binary Inputs; Binary Outputs - Siemens SICAM Q100 7KG95 Series Manual

Operational Indications and Operating Parameters
8.2 Process Connections
Parameter
Voltage harmonic unit
Measurement aggregation

Binary Inputs

8.2.2
Table 8-2
Parameter
Threshold voltage
Threshold voltage
(one setting for both binary
inputs)
Binary inputs
49
Routed as:
Software filtering time
(only settable if Routed as: is
set to Status information)
Source inverted
Add entry to operational log
(only settable if Routed as: is
set to Status information)
Binary input indication

Binary Outputs

8.2.3
Table 8-3
Parameter
Source type
Source Type Indication
51
Indication
Source inverted
(can be set individually for all
relay outputs)
48 You can select none/150-cycle interval on 50 Hz or none/180-cycle interval on 60 Hz. If none is selected, the value will be updated
every 10/12 cycles. If 150-cycle interval or 180-cycle interval is selected, the value will be updated every 3 s.
The parameter cannot be changed in this field. In the Configuration tab, Energy management menu, select Load profile source or
49
Tariff source. If you did not select a source, Status information is automatically selected.
31 bytes of UTF-8
50
51 If you select -none- as the source of an indication or energy counter, the corresponding binary output is inactive.
352
Default Setting
%
-none-
48
Settings for Binary Inputs U1/U2 and U3/U2
Default Setting
19 V
Status information
1 (* 2 ms)
no
yes
For example for terminal
U3/2:
Binary Input 2
Settings for Binary Outputs
Default Setting
Indication
-none-
No
Setting Range
%
V
-none-
150/180-cycle interval
Setting Range
19 V
88 V
176 V
Status information
Load profile source
Tariff source
2 ms to 120 000 ms
(settable in 2-ms increments)
no
yes
no
yes
50
Max. 31 characters
Setting Range
Indication
Energy counter
Acc. to list box
No
Yes
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020