Security Settings; Password Management - Siemens SICAM Q100 7KG95 Series Manual

Operational Indications and Operating Parameters
8.7 Administration
Table 8-37
Parameter
RADIUS active
Primary RADIUS server
IP address
Port
Secret
Secondary RADIUS server
IP address
Port
Secret

Security Settings

8.7.10
Table 8-38
Parameter
Maximum consecutive attempts
Consecutive password attempt
time period
Logon block timeout
Session timeout

Password Management

8.7.11
Table 8-39
Parameter
User name
Roles
Current password
New password
Repeat new password
374
Settings for the RADIUS Server
Default Setting
no
0.0.0.0
1812
Empty
0.0.0.0
1812
Empty
Settings for Security Settings
Default Setting
5
5
30
10
Settings for Password Management
Default Setting
Fixed, not configurable
Empty
Setting Range
no
yes
Any
0 to 65 535
Any (16 to 32 characters)
Any
0 to 65 535
Any (16 to 32 characters)
Setting Range
5 times to 12 times
1 min to 10 min
30 min to 360 min
0 min (no timeout) to 1440 min
(1 day)
If the device restarts, you must log
on again.
Setting Range
The user name and roles depend on the settings
made by the account management.
8 to 24 characters
Contains at least:
•
1 capital letter (A to Z)
•
1 small letter (a to z)
•
1 digital number (0 to 9)
•
1 special character
~, !, @, #, $, %, ^, &, *, (, ), _, +, -, =, [, ],
{, }, \, ;, ', :, ", comma, ., /, <, >, ?
SICAM, SICAM Q100 7KG95xx, Manual
E50417-H1040-C522-A8, Edition 09.2020