No Ip Ssh; Ip Ssh Protocol; Show Ip Ssh; Device Configuration Commands - NETGEAR ProSafe GSM7224 User Manual

User Manual for the NETGEAR 7200 Series Layer 2 Managed Switch Software

no ip ssh

This command is used to disable SSH.
Format
Mode

ip ssh protocol

This command is used to set or remove protocol levels (or versions) for SSH. Either SSH1 (1),
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default
Format
Mode

show ip ssh

This command displays the ssh settings.
Format
Mode
Administrative Mode
Protocol Level
Connections This field specifies the current ssh connections.

Device Configuration Commands

addport

This command adds one port to the port-channel (LAG). The first interface is a logical slot and
port number of a configured port-channel.
Note: Before adding a port to a port-channel, set the physical mode of the port. See 'speed'
command.
8-36
no ip ssh
Privileged EXEC
1 and 2
ip ssh protocol [1] [2]
Privileged EXEC
show ip ssh
Privileged EXEC
This field indicates whether the administrative mode of SSH is
enabled or disabled.
The protocol level may have the values of version 1, version 2 or
both versions 1 and version 2.
202-10009-01_060204
Switching Commands