Operating Modes; Weigh Mode; Configuration Mode; User Setup Mode - Rice Lake 880 Performance Series Operation Manual

880 Performance Series Controller/Indicator
1.4

Operating Modes

The three modes of operation for the 880 are described in the following sections.
1.4.1

Weigh Mode

In this mode, the indicator displays gross or net weights to indicate the type of weight value
displayed and annunciators to indicate scale status.
1.4.2

Configuration Mode

Most of the procedures described in this manual, including configuration and calibration,
require the indicator to be in Configuration mode.
To enter Configuration mode, remove the fillister head screw from the enclosure backplate.
Insert a non-conductive tool into the access hole and press the setup switch once.
SCALE displays.
Breaking the seal to enter Configuration mode voids a Legal for Trade unit.
IMPORTANT
1.4.3

User Setup Mode

User Setup mode (accessed by pressing MENU) is used to:
• View the audit trail
• Set the time and date
• View or clear the accumulator value
• Change setpoint values
• View the current tare value
• Enter Setup mode (if audit trail is enabled)
ee
S 880 Performance Series Technical Manual (PN 158387) for more info
4 Visit our website www.RiceLake.com
rmation.