Install The Front Door On A Ptx10004; Install The Front Door On A Ptx10004 Router - Juniper PTX10004 Hardware Manual

137

Install the Front Door on a PTX10004

IN THIS SECTION

Install the Front Door on a PTX10004 Router | 137

Install and Remove a Front Door with Filter | 139
Install the Front Door on a PTX10004 Router
The front door (JNP10004-FRNT-PNL) is required on the PTX10004 to protect fiber-optic cabling and to
provide additional protection from electromagnetic interference (EMI). The front door can be installed
with or without the optional cable management system. You can also order JNP10004-FPNL1 for
installations that require an air filter.
Be sure to have the front door (provided with the router chassis before you begin. See Figure 52 on page 137
to identify the front door.
Figure 52: Front Door
1
1 Front door
—