Software - Juniper PTX10004 Hardware Manual

Packet transport router
Hide thumbs Also See for PTX10004:
Table of Contents

Advertisement

Figure 10: JNP10K-PWR-DC2 Power Supply
Table 4 on page 27
provides an overview of the differences between the power supplies.
Table 4: Power Supply Overview
Power Supply Model
JNP10K-PWR-AC2
JNP10K-PWR-DC2
The PTX10004 supports four PTX10K-LC1201-36CD line cards in non-redundant mode. If you populate
all four slots with this line card, a power alarm is raised, which is expected behavior.

Software

The Juniper Networks PTX10004 packet transport router runs on the Junos OS Evolved operating system,
which provides Layer 3 routing services. Junos OS Evolved is the next-generation Junos OS. It has the
same CLI, the same features, and, in some cases, even the same processes as in the previous versions of
Junos OS. However, its infrastructure is entirely modernized.
SEE ALSO
PTX10004 Cooling System and Airflow | 40
PTX10004 Field-Replaceable Units | 35
PTX10004 Power System | 54
Input Type
AC, HVAC, or HVDC
DC only
Wattage
5000 W, single feed; 5500 W, dual feed
2750 W, single feed; 5500 W, dual feed
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptx10004-base3Ptx10004-prem2Ptx10004-prem3

Table of Contents