Ptx10K-Lc1202-36Mr Port Numbering; Ptx10004 Cable Management System - Juniper PTX10004 Hardware Manual

PTX10K-LC1202-36MR Port Numbering

Figure 33: Port numbering for PTX10K-LC1202-36MR (PTX10004)
P0
PWR
STS
OFF
et-3/0/4
et-3/0/2
et-3/0/0 et-3/0/6
P0
PWR
STS
OFF
et-3/0/1 et-3/0/7
et-3/0/3
et-3/0/5
Figure 33 on page 78 shows an example of the port numbering for the PTX10K-LC1202-36MR line card
used in the slot 3 of the PTX10004 line card.

PTX10004 Cable Management System

You can use the PTX10004 cable management system (see
away from the line-card ports for better airflow through the chassis. Using this optional system also makes
it easier to use cable ties or strips to organize the cabling.
et-3/0/10 et-3/0/16
et-3/0/8 et-3/0/14 et-3/0/20
et-3/0/12 et-3/0/18
et-3/0/13 et-3/0/19
et-3/0/9 et-3/0/15 et-3/0/21
et-3/0/11 et-3/0/17
et-3/0/22 et-3/0/28 et-3/0/34
et-3/0/26 et-3/0/32
et-3/0/24 et-3/0/30
et-3/0/25 et-3/0/31
et-3/0/27 et-3/0/33
et-3/0/23 et-3/0/29 et-3/0/35
Figure 34 on page
LC1
79) to route optical cables
78