Table of Contents
Advertisement
Remove a JNP10K-PWR-AC2 Power Supply
WARNING:
when removing a working JNP10K-PWR-AC2 power supply from the chassis. These
power supplies can reach temperatures between 158°F and 176°F (70°C to 80°C)
under running conditions.
CAUTION:
sufficient to power the router left in the chassis. See
PTX10004 Components" on page
Before you remove a JNP10K-PWR-AC2 power supply from the chassis:
Ensure that you understand how to prevent ESD damage. See
Damage" on page
298.
Ensure that you have the following parts and tools available:
Heat-protective gloves able to withstand temperatures of 158°F (70°C)
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Replacement power supply or a cover for the power supply slot
CAUTION:
is operational. Either replace the power supply promptly or install a cover over the
empty slot.
To remove a JNP10K-PWR-AC2 power supply from a PTX10004 router:
Protect yourself from severe burns by wearing heat-protective gloves
Before you remove a power supply, ensure that you have power supplies
89.
Do not leave the power supply slot empty for a long time while the router
"Power Requirements for
"Prevention of Electrostatic Discharge
181
Advertisement
Table of Contents
