Install The Front Door On An Mx10004 Router - Juniper MX10004 Hardware Manual

12. Attach the restraint to the rack by inserting six mounting screws through each open flange hole and
rack hole (see Figure 43 on page
Figure 43: Attach the Safety Restraint

Install the Front Door on an MX10004 Router

SUMMARY
The front door (JNP10004-FRNT-PNL) on the
Juniper Networks MX10004 router protects the
fiber-optic cabling and protects the router from
electromagnetic interference (EMI).
You can install the front door with or without the optional cable management system. You can also order
JNP10004-FPNL1 for installations that require an air filter.
127). Tighten the screws.
IN THIS SECTION
Install a Front Door Without the Air Filter on
an MX10004 Router | 128
Install a Front Door with Filter | 130
127