Before You Install The Cse2000 - Juniper CSE2000 Hardware Installation Manual

Carrier-Grade Service Engine CSE2000 Hardware Installation Guide
Related
Documentation

Before You Install the CSE2000

Related
Documentation
42
After you remove the equipment from the shipping boxes:
Confirm the contents of each box.
Inspect all external surfaces and external connectors for visible signs of damage.
Inspect all accessories in the accessory box.
Document any damage noted during your inspection.
Confirm that the platform has the correct number and type of modules for your ordered
configuration.
If you detect or suspect damage to any equipment:
Contact the shipper responsible for delivery, and formally report the damage.
Contact Juniper Networks at 1-888-314-JTAC (from the United States, Canada, or
Mexico) or 1-408-745-9500 (from elsewhere), or contact your sales representative
or reseller if you have any questions or concerns.
Returning CSE2000 Hardware for Repair or Replacement on page 73
Before installing the CSE2000:
Verify that the site meets all environment specifications. See
Requirements and Specifications for CSE2000" on page
Read and understand the clearance requirements for the device to ensure adequate
ventilation and enable access to the device for maintenance. See
Requirements for Airflow and Hardware Maintenance for the CSE2000" on page
Have the tools and accessories needed to complete the installation. See
and Inspecting the CSE2000" on page
Verify that the cables you plan to use meet the specifications, and review the cabling
recommendations. See
Have plastic cable ties or other means to secure traffic and power cables safely out
of the way.
Verify that the electrical supply meets all AC or DC power requirements. See
Specifications for the CSE2000" on page
Installing the CSE2000 Chassis in a Rack on page 43
41.
"AC Power Cord Specifications for the CSE2000" on page
21.
"Environmental
13.
"Clearance
"Unpacking
"Power
Copyright © 2014, Juniper Networks, Inc.
15.
17.