Table 37: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input (continued)
Locale
Cord Set Rating
Switzerland
16 A, 250 VAC
JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input
The JNP10K-PWR-AC2 HVAC or HVDC power supplies require a high-current cable assembly when set
for 30-A input. One end of the cable has an Anderson APP-400 connector, while the other end of the
cable is bare wire. See
Figure 38 on page 100
and are not shipped automatically with JNP10K-PWR-AC2 orders. An example of the right-angle cable
and connector is shown in
For connection to AC systems, Juniper provides a cable with either a NEMA 30-A connector
(Figure 38 on page
100) or an IEC 330P6W connector
Figure 38: NEMA 30-A Locking Connector
Figure 39: IEC 330P6W Connector
Plug Standard
CEI 23-50
and
Table 38 on page
Figure 40 on page
102.
Spare Juniper
Model Number
CBL-JNP-SG4-SZ
101. These cables are separately orderable
(Figure 39 on page
100).
100
Graphic