RELATED DOCUMENTATION
PTX10004 Rack Requirements | 86
PTX10004 Clearance Requirements for Airflow and Hardware Maintenance | 88
Chassis and Component Lifting Guidelines | 271
Unpack the PTX10004 Router
IN THIS SECTION
Unpack the PTX10004 Shipping Pallet | 116
Unpack Line Cards, Routing Control Boards, and Switch Interface Boards for the PTX10004 | 118
Compare the PTX10004 Order to the Packing List | 121
Register Products—Mandatory to Validate SLAs | 125
To unpack the PTX10004 router and its components, read the following sections.
Unpack the PTX10004 Shipping Pallet
After you prepare the installation site as described in
you can unpack the router.
NOTE:
The chassis is maximally protected inside the shipping box. Do not unpack it until you
are ready to begin installation.
Before you start, be sure that you have a box cutter or packing knife to slice open the nylon straps and
tape that seal the crate and boxes.
The chassis ships in a cardboard box that has a two-layer wooden pallet base with foam cushioning between
the layers.
"PTX10004 Site Preparation Checklist" on page
116
82,