Table of Contents
Advertisement
Table 23: Routing and Control Board Clock Status LEDs
LED
Clock LEDs—BITS-0 and
BITS-1
SEE ALSO
Install a PTX10004 Routing and Control Board | 162
Remove a PTX10004 Routing and Control Board | 164
PTX10004 Switch Fabric
IN THIS SECTION
PTX10004 Switch Interface Board Description | 68
The PTX10004 Switch Interface Boards (SIBs) form the switch fabric for the router.
PTX10004 Switch Interface Board Description
Switch Interface Boards (SIBs) create the switch fabric for the PTX10004. The router contains between
three and six SIBs that are installed vertically, mid-chassis, between the line cards and the RCBs in the
front and the fan trays in the rear.
The SIBs make up the PTX10004 switching plane that supports the 14.4-Tbps line card and operates in
Junos OS Evolved systems. Each SIB has four connectors that correspond to a matching connector on one
of the four line cards; see
Color
State
Red
Off
On steadily
Figure 28 on page
69.
Description
Clock is active.
Clock is not working.
68
Advertisement
Table of Contents
