Table of Contents
Advertisement
5. Remove the cardboard accessory box.
6. Remove the foam padding from the top of the box.
7. Remove the plastic cover from the router chassis.
8. Use a mechanical lift or unload all of the components, except the fan tray controller, and manually lift
the chassis from the shipping pallet. See
on page
129.
Figure 42: Lift the Chassis Off of the Pallet
9. Unpack the accessory box and lay out the contents so that they are ready for use.
10. Verify that your order includes all appropriate parts. See
List" on page 121
and
base configurations and redundant configurations.
11. Save the shipping box and packing materials in case you need to move or ship the router at a later time.
Unpack Line Cards, Routing Control Boards, and Switch Interface Boards
for the PTX10004
Line cards, additional Routing and Control Boards (RCBs), and additional Switch Interface Boards (SIBs)
components are field-replaceable units (FRUs) that are shipped separately from the router chassis. The
housing for the RCBs and line cards are rigid sheet-metal structures that house the electronics. SIBs have
Figure 42 on page 118
"PTX10004 Components and Configurations" on page 28
and
"Install the PTX10004 into a Rack"
"Compare the PTX10004 Order to the Packing
for information about
118
Advertisement
Table of Contents
