Adapting The Measuring Device To The Process; Conditions; Performing A Totalizer Reset; Disabling The Bluetooth Interface - Endress+Hauser Proline Promag W 800 Operating Instructions Manual

Proline Promag W 800
Parameter
Reset all totalizers
Parameter
Bluetooth
* Visibility depends on order options or device settings
Endress+Hauser
11.2

Adapting the measuring device to the process

conditions

To do so, users can choose from the following menus:
• Guidance
• Application
Detailed information on "Guidance menu" and "Application menu": Device parameters
→  120
11.3

Performing a totalizer reset

Navigation
"Application" menu → Totalizers → Totalizer handling → Reset all totalizers
Parameter overview with brief description
Description
Reset all totalizers to 0 and start.
11.4

Disabling the Bluetooth interface

The disabling of the interface can only be undone using Wake on Touch →  72.
Navigation
"System" menu → Connectivity → Bluetooth configuration → Bluetooth
Parameter overview with brief description
Description
Enable or disable Bluetooth function.
11.5

Enabling the software option

11.5.1

"Software configuration" submenu

Navigation
"System" menu → Software configuration
‣
Software configuration
Activate SW option
Software option overview
Selection
• Cancel
• Reset + totalize
Selection
• Enable
• On touch
*
• Not available
→  74
→  74
Operation
73