Show Ports Security - D-Link DES-3010FA Cli Manual

D-Link DES-3010FA/GA/PA CLI Reference Guide

show ports security

The show ports security Privileged EXEC mode command displays the port-lock status.
Syntax
show ports security [ethernet interface | port-channel port-channel-number]
Parameters
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
In this example, all classes of entries in the port-lock status are displayed:
Console# show ports security
Port
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disqbled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
ch1 Disabled
ch2 Disabled
ch3 Disabled
ch4 Disabled
ch5 Disabled
ch6 Disabled
Action Trap
-
Discard Disabled
- -
- -
- -
- -
- -
- -
- -
- -
Page 45
Frequency
-
-
-
-
-
-
-
-
-
-