Optional Accessories
High Capacity Stacker 80 (HCS80)
Control Panel
Stacker Tray/Cart
The HCS80 is an optional finishing device that provides stacking and offsetting capabilities for
output to a Stacker Tray. The HCS80 connects to the right side of the digital press replaces the
Offset Catch Tray (OCT).
Top Tray
Sheets are transported to the Top Tray:
•
When sheets are purged after a paper jam.
•
When the Sample Set button is selected.
•
When selected as an Output Location.
•
Labels must be sent to the Top Tray.
Stacker Tray/Cart
Collated sets are transported to the Stacker Tray located on a moveable Stacker Cart.
Bypass
The Bypass (only required when a second stacking device is installed) transports collated sets
through the HCS80 to a connected finishing device or to another HCS80.
If your system configuration has two stackers, the bypass on the second stacker is not used.
8-2
Top Tray
Bypass
DocuColor 7002/8002
User Guide