Paper Tray Attributes - Xerox CopyCentre C123 User Manual

Job Type on Job Status screen
Select the job types to be displayed when you select [Completed Jobs] on the [Job
Status] screen.
Default Language
Select the initial language to be displayed on the touch screen. By using the
<Language> button on the control panel, you can change the initial language as
required.

Paper Tray Attributes

This screen allows you to configure various settings for trays, and for paper to be
loaded in the trays.
1.
Select [Paper Tray Attributes] on
the [Common Settings] screen.
2.
Select the required option.
3.
Select [Close].
Custom Paper Name
Assign names to custom paper 1 to 5 when using only plain paper, bond paper, and
recycled paper. Each name can be up to 24 alphanumeric characters and symbols.
Assigned names are displayed in the screens relating to paper supply.
Paper Type
Specify the type of paper to be loaded in Tray 1, Tray 2, and Tray 5 (Bypass). Trays 3
and 4 can also be set up, when these optional trays are fitted.
Paper Size
Specify whether the size of paper loaded in Tray 1 to 2 (Trays 3 and 4 can also be set
up, when these optional trays are fitted) is to be automatically identified by the machine
as one of the standard paper sizes or identified according to manually entered
dimensions for a custom paper size. When you select [Variable Size], the entry fields
for specifying dimensions are displayed.
NOTE: You cannot select [Variable Size] for Tray 3 or Tray 4 if the Tandem Tray
Module is installed.
Paper Tray Priority
Specify either Tray 1 or Tray 2 to be given priority by Auto Tray Switching. When the
optional Tray 3 and 4 are fitted, these can be included and a priority order can be
specified. Tray 5 (Bypass) is not available for Auto Tray Switching. For more
information on Auto Tray Switching, refer to Auto Tray Switching in the Paper and Other
Media chapter on page 182.
Xerox CopyCentre/WorkCentre/WorkCentre Pro 123/128 User Guide
Common Settings
193