Qiagen EZ2 Connect MDx User Manual page 90

6. Tap Accept.
7. Tap Test connection.
Note: If you have any trouble regarding the QIAsphere Base, please refer to the QIAsphere Base
user manual or contact the QIAGEN support.
Configuring LIMS connection
Note: Only administrators can configure the LIMS connection.
Note: System Configuration is only available to users with administrator role.
Important: Use only the USB flash drive provided by QIAGEN. Do not connect other USB flash
drive devices to USB ports.
Important: Do not remove the USB drive while downloading or transferring data or software to or
from the instrument.
The EZ2 Connect MDx can be connected with a LIMS system, the connection can be configured
from the Configuration menu under the LIMS tab and by completing the following steps:
Upload the LIMS Connector certificate

Generate new instrument certificate

Enter the LIMS Connector URL

Register the instrument in the LIMS connector

QIAGEN LIMS Connector is a connectivity component which enables the data transfer between the
EZ2 and Laboratory Information Systems (LIS), Laboratory Information Management Systems (LIMS),
Laboratory Automation System (LAS), Workflow Management Systems or Middleware Systems.
Important: The installation of QIAGEN LIMS Connector must be performed by a QIAGEN
Representative. A person who is familiar with your laboratory and computer equipment should be
present during the installation of the QIAGEN LIMS Connector. QIAGEN offers a dedicated service
to establish the communication between the EZ2 Connect MDx and your LIMS system. If you wish
QIAGEN to set up such a connection, contact your QIAGEN Sales Representative to request a
quotation.
EZ2 Connect MDx User Manual 05/2022 90