Packaging And Transportation Of The Ez2 Connect Mdx - Qiagen EZ2 Connect MDx User Manual

4.4

Packaging and Transportation of the EZ2 Connect MDx

WARNING Risk of personal injury
The EZ2 is too heavy to be lifted by one person. To avoid personal injury or
damage to the instrument, do not lift the instrument alone.
Before transporting the EZ2 Connect MDx, the instrument must first be decontaminated. Refer to
Disinfecting the EZ2 and Removing contamination for more details. Then prepare the instrument as
follows.
1. Prepare the packing materials.
2. Install transport locks (two) for Y-Axis.
3. Install transport lock for P-Axis.
4. Close instrument hood and install the foam strip in the gap between the hood and the front top
cover.
5. Move instrument to transportation box base.
Important: Two persons are required to lift the EZ2.
Important: Do not hold the touchscreen display while unpacking or lifting the EZ2, this might
damage the instrument.
6. Install outer carton box.
7. Package accessories into the accessories box, place into top of the transportation box
together with the PE foam at its perimeter.
8. Add the top layer PE foam.
9. Seal the outside edges of the carton with tape.
Note: Using the original package minimizes potential damage during transportation of the EZ2
Connect MDx.
EZ2 Connect MDx User Manual 05/2022 56