Qiagen EZ2 Connect MDx User Manual page 66

Figure 33. The login screen.
3. Tap the User ID field and enter your user ID using the on-screen keyboard. For more
information on using the on-screen keyboard, refer to the Entering text and numbers section
(see page 62).
Note: If this is the first time the EZ2 is switched on, enter the default user ID, which is Admin.
4. Tap the Password field and enter your password using the on-screen keyboard.
Note: If this is the first time the EZ2 is switched on, enter the User ID/default password, which
is Admin/Admin.
Note: After log in the system will check available disk space and a warning message will
appear if insufficient disk space is available for 5 protocol runs. See Section 5.12, Data menu
> Run reports, for details on how to download and delete run reports to free up disk space.
Note: After first log in using the default Admin account, the password should be changed
according to the Password policy described in the Managing user security section (see page
77) and as per instruction in the Changing password section (see page 75).
5. Please select the IVD or Research mode to launch. For details of the software modes, please
refer to the General Description: Principle section (see page 25).
6. Tap Log in. If the credentials you entered are correct, the Home screen appears. If the
credentials you entered are incorrect, an error message is shown.
Note: If the number of failed login attempts exceeds the limit set by your administrator (this is
set to 3 attempts by default), your account is locked. To activate your account, contact your
administrator. If you are the only user with an administrator role and your account is locked,
contact QIAGEN Technical Support.
EZ2 Connect MDx User Manual 05/2022 66