Installation Of Wi-Fi Adapter (Optional); Initial Configuration Of The Ez2 - Qiagen EZ2 Connect MDx User Manual

WARNING Risk of personal injury
Hazard Level 2 laser light: Do not stare into the light beam when using handheld
bar code scanner.
4.3.4

Installation of Wi-Fi adapter (optional)

Note: Wi-Fi adapter is supplied with the connectivity package in certain regions. If supplied, the
following steps should be performed to correctly install the Wi-Fi adapter:
1. Remove the Wi-Fi adapter from the packaging.
2. Before turning on the instrument, plug the Wi-Fi adapter into one of the 3 USB ports located
on either the front of the instrument or on the rear of the touchscreen.
Note: It may be more convenient to use the USB ports on the rear of the touchscreen.
4.3.5

Initial configuration of the EZ2

Note: Make sure that the EZ2 has equilibrated to ambient temperature before powering on.
1. To power on the EZ2 Connect MDx instrument, first ensure the hood is closed. After you press
the power button, the power button lights up, the startup screen appears on the touchscreen, a
sound plays, and the instrument initializes.
Figure 23. The login screen.
EZ2 Connect MDx User Manual 05/2022 52