Qiagen EZ2 Connect MDx User Manual page 88

Note: If you failed to connect to the network several times despite entering the correct
password, it is recommended to restart the instrument.
Note: In case of errors, refer to the Troubleshooting section (page 159) for more information.
Figure 71. Successful connection to a Wi-Fi network.
7. To disconnect from a network, tap the row that represents the network that the instrument is
connected to. Then, tap Disconnect.
8. To view additional information about the network, or to change its password, tap Advanced.
To go back to the Wi-Fi tab, tap Back. To change the password, tap Change password. To
disconnect from the network, tap Disconnect.
Note: Configure the network in a way that makes the EZ2 instrument not visible outside the
network of your organization.
Figure 72. Network settings dialog.
EZ2 Connect MDx User Manual 05/2022 88