Introduction; About This User Manual - Qiagen EZ2 Connect MDx User Manual

1

Introduction

Thank you for choosing the EZ2 Connect MDx. We are confident it will become an integral part of
your laboratory.
This user manual describes the EZ2 Connect MDx.
Before using the EZ2 Connect MDx, it is essential that you read this user manual carefully and pay
attention to the safety information. The instructions and safety information in the user manual must
be followed to ensure safe operation of the instrument and to maintain the instrument in a safe
condition.
1.1

About this user manual

This user manual provides information about the EZ2 Connect MDx (hereafter also referred to as
EZ2) in the following sections:
Introduction — contains the intended use and requirements for users

General information — contains information regarding the intended use and requirements of

the EZ2
Safety Information — includes important information on any hazards related to the EZ2 and

how to properly use the instrument
General Description — an overview of the features of the EZ2

Installation Procedures — instructions on how to set up the instrument before its first use

Operating Procedures — includes instructions related to protocol runs

Maintenance Procedures — contains information about cleaning and maintenance

Troubleshooting — instructions on what to do in case of any problems with the EZ2

Glossary — an alphabetical list of terms or words used in this user manual with explanations

Technical Specification — Technical data

The appendices contain the following information:
Appendix A — Legal requirements for the EZ2

Appendix B – EZ2 Connect MDx Accessories — an overview of the accessories available for

the EZ2 with required ordering information
Ordering Information — Ordering information

Document Revision History — the changes made to the user manual

EZ2 Connect MDx User Manual 05/2022 6