Qiagen EZ2 Connect MDx User Manual page 85

Note: Configure the network in a way that makes the EZ2 instrument not visible outside the
network of your organization.
Note: Hardware address = MAC address
Figure 66. Configured LAN tab.
Configuring a Wi-Fi connection
Note: Only administrators can configure Wi-Fi settings.
Note: Make sure the Wi-Fi USB device was plugged-in before the machine was started.
The EZ2 can be connected to a Wi-Fi network using the Wi-Fi adapter inserted into one of the USB
ports. The Wi-Fi adapter supports the 802.11b, 802.11g, and 802.11n Wi-Fi standards, and
WEP, WPA-PSK, and WPA2-PSK encryption.
EZ2 Connect MDx User Manual 05/2022 85