Installing New Protocols - Qiagen EZ2 Connect MDx User Manual

2. Tap User security.
Figure 54. User security tab.
3. To change the password settings, select the user role whose policy you want to change from
the User role drop-down list.
4. To enable password expiration, select the Enable password expiration checkbox.
5. To specify the number of days after which user passwords expire, enter a value in the Days
field within acceptable range 1 to 360.
6. To specify the number of incorrect login attempts after which a user account is locked, enter a
value in the Incorrect login attempts field within acceptable range 1 to 50. It is recommended
to set to at least 2 incorrect attempts. Otherwise, one typographical error will lock your
account. Only administrators can unlock locked accounts.
7. Tap Accept to save all changes, or tap Cancel to restore previously saved settings.
5.3.6

Installing new protocols

Note: Only administrators can install new protocol packages.
Note: Protocols tab is only available to users with administrator role.
Note: To ensure that your EZ2 has the latest protocol versions installed, please visit the EZ2 Connect
MDx webpage at https://www.qiagen.com/de/products/ez2-connect-mdx/. Protocol versions
can be found during the set-up wizard, step 2 of 7.
EZ2 Connect MDx User Manual 05/2022 78