Installing The Ez2 Connect Mdx - Qiagen EZ2 Connect MDx User Manual

Figure 21. Transport lock.
11. Remove silica gel from the unit.
12. Remove the transport lock for Y-Axis (front to back) by pushing the bottom of transport lock
towards rear direction and pull it out from the rear. There are a total of two transport locks for
Y-Axis.
13. Check if the packing list document is included after unpacking the EZ2.
14. Read the packing list to check that you have received all items. If anything is missing, contact
QIAGEN Technical Services.
15. Check that the EZ2 is not damaged and that there are no loose parts. If anything is
damaged, contact QIAGEN Technical Services. Make sure that the EZ2 has equilibrated to
ambient temperature before powering on.
16. Retain the package in case you need to transport the EZ2 in the future. Refer to the
Packaging and Transportation of the EZ2 Connect MDx section (page 56) for more details.
Using the original package minimizes the possibility of damage during transportation of the
EZ2.
4.3

Installing the EZ2 Connect MDx

This section describes important actions that must be performed before operating the EZ2.
These actions include:
Removal of the EZ2 accessories and shipping material.

Installation of the AC power cord

Installation of external barcode scanner

Installation of the Wi-Fi adapter (if supplied with connectivity package)

EZ2 Connect MDx User Manual 05/2022 49